Dynam Detrum SR86A -G Autopilot Safety System Receiver

Dynam Detrum SR86A-G Autopilot Safety System Receiver
Made By: Dynam
Item No.: DTM-R007 (Buy-It-Now)

SR86A-G 8CH Autopilot Safety System Receiver
Sensor: 6-axis gyro, barometric pressure, GPS
Sensitivity: -97dBm
Output: PWM (71Hz)
Transmission Range: More than 1000m on the ground,  more than 1600m in the air
Input Voltage: 3.6~16V
Dimension: 42.3*31*13.1mm
Net Weight: 14g
Compatible with Gavin 8C, Blitz DT9
Q'TY: 1P

FEATURES:
Return Home:
Adding path control based on the auto-recovery mode, it allows the airplane to automatically plan the path, lead the airplane back to the starting point. Height is controllable during the return flight. You can exit the return mode at any time by waving the return switch, supporting one-button return and signal loss return.
Main Control IC:
32-bit high-performance ARM core processor, 6-axis MEMS gyro chipset
Control Algorithm:
Original airplane attitude stabilization algorithm and control algorithm. Support normal wing, fly wing, V-tail airplanes, and 3D planes.
Flight Mode:
Four flight modes: Gyro off, Normal, Aerobatic, and Auto-Recovery (Auto Balance). You can switch between different modes by the toggle switch.
Adjusting the Gain: Set the gain and other programmable items with matched transmitter.
High Sensitivity:
SR86A adopts 2.4GHz direct sequence spread spectrum (DSSS) and multiple frequency-hopping (FHSS) technologies, having high receiving sensitivity and strong anti-interference capability.
Diversity Antenna:
By using diversity antenna, combined with the signal detection and switching algorithm, the receiving signal is stable and reliable.
Unique ID Code:
Once the binding is made, the ID code is stored in the receiver and no further binding is necessary after restarting the receiver.
Output Signals: 8-channel PWM